Configure ESD signal RS Logix 5000

shazad5444

Lifetime Supporting Member
Join Date
Feb 2014
Location
Houston
Posts
126
Looking for help regarding my below question, I'm not very experienced in the world of PLC, but trying my best.

Here at job site we have two PLC , one is PCS (Where all plant process signals are configured) and 2nd is SIS (Where all ESD signals are configured).
Now problem is I need to configure one Flow switch (ESD) in SIS PLC system, this switch is installed on upstream of Gas line, all other instruments which are installed on this line are coming to PCS. To configure this switch in SIS I also need some signals from other instruments to confirm its operation and I need to take signal from our PCS PLC. My question is can I use produced / consume or message instructions in our SIS PLC system to configure this flow switch?
 

Similar Topics

hi all i am new here i have a mitsubishi smart touch hmi i.e ms-60t-pe but i cannot find a software to edit and download a program in it any help...
Replies
3
Views
100
Hello, I am trying to connect a Stride Analog Output module to a 1769 CompactLogix via Ethernet. I added a new Generic Ethernet Module for the...
Replies
4
Views
180
Dear all, I am beginer in ifix hmi programming. I have 2 ifix 6.0 pc with license FiX and client.. Can some one tell me how to configure sample...
Replies
0
Views
114
Hi all, the machine I am programming the Rockwell PLC for has about 100 parameters that need to be adjusted for every customer. I would like to...
Replies
20
Views
1,829
Within the last week or so, PME has crashed whenever I try to open a configure IO screen. I am running V8.0 Build 6215. Offline configuration of...
Replies
3
Views
359
Back
Top Bottom