mA Output Freezes at 16mA

jaguirre

Member
Join Date
Oct 2018
Location
Manila
Posts
1
Output stops when it reaches 16mA (75%).

0% -> 0mm -> 4mA
25% -> 2400mm -> 8mA
50% -> 4800mm -> 12mA
75% -> 7200mm -> 16mA
100% -> 7200mm -> 16mA

Happens at PLC side.
Do you experience or encounter the same problem?

Output from Yokogawa DCS were simulated, works properly from 0% to 100%.
 
Last edited:

Similar Topics

How can I use 1 button and 1 light using only b3
Replies
5
Views
120
Compactlogix controller, program has 28 conveyors that use TON's to start the conveyors. The TT sounds a warning horn during start and the DN...
Replies
6
Views
95
Hello guys, I am new to this forum and have some problems with my PowerFlex755 EENET frequency inverter. I want to do a point to point...
Replies
0
Views
44
Hi We're having issues with an FX1N-1DA-BD Analog output module. We're using an metallic contamination sensor MCS 1000 to detect particles. This...
Replies
1
Views
60
Hello The plant is running and there is no shutdown nowadays therefore I can add 1734- AENTR and its card while PLC is in Run? I do not wanna...
Replies
1
Views
113
Back
Top Bottom