Omron Internal Fuse

Bob O

Member
B
Join Date
May 2003
Location
Posts
1,873
We have a piece of equipment with an Omron Model 3G2A5-PRO13E/3G2A6-PRO15E SYSMAC-C Series PLC.
I am not getting 24 VDC out from the power supply on the PLC. I don't have the manual for this or any Omron PLC. The machine runs fine with an external power supply hooked up.
Is there and internal fuse for the 24 VDC power supply?

Thanks,
Bob
 

Similar Topics

scrambled
Do Omron Function Blocks retain the value of internal variables between calls?
So I have a program for an Omron CJ1M PLC that I have to reverse engineer for a customer. This PLC is meant to control a water pump station...
Replies
2
Views
1,840
scrambled
scrambled
J
Reading internal address -- Omron C1PL-L
Hello, friends.. I made a post over at MrPLC.net and I didn't get an answer so here I am.. I'm just gonna copy my post over here : First thing...
2
Replies
17
Views
3,932
JP001
J
K
Omron-internal Relay????
Hi evrebody,I never work with Omron PLC but I get a project with ck40.Using syswin4.3 I could not find how to put the internal relay in...
Replies
3
Views
3,406
karlag
K
M
Omron Internal Timers
The Omron PLC CPM 2A-60 has a small glitch. When all the permissives are satisfied the long timer won't time down. When the timer bit is forced...
Replies
6
Views
2,905
gtsuport
G
K
omron internal vs. external I/O's
I am a robot technician at work where we use mostly Omron PLC's. About 8 years ago I took a course on PLC's (Texas Instruments). We used a DOS...
Replies
5
Views
7,712
Ken44
K
Back
Top Bottom