Hello,
Having a problem I have not encountered before. This is an existing set up that has been running for a couple of years.
Recently while making some changes in one of the routines, and trying to download to the processor I ran in to an issue.
The RSlogix 5000 goes through the download process. However when I attempt to go online I get an error that "Can't communicate with RSLinx. RSLogix 5000 has been taken offline"
Followed by the notification "The controller acknowledged your request for transition to run mode, but it has not completed the transition".
Any help would be appreciated. I have been banging my head against the wall.
Having a problem I have not encountered before. This is an existing set up that has been running for a couple of years.
Recently while making some changes in one of the routines, and trying to download to the processor I ran in to an issue.
The RSlogix 5000 goes through the download process. However when I attempt to go online I get an error that "Can't communicate with RSLinx. RSLogix 5000 has been taken offline"
Followed by the notification "The controller acknowledged your request for transition to run mode, but it has not completed the transition".
Any help would be appreciated. I have been banging my head against the wall.