siemens s7 200

Crunky · Feb 21, 2005

I need to scale a register from 0- 32000 to represent an engineering unit of 0-60. Any ideas ? Thank You

Doug_Adam · Feb 22, 2005

What accuracy do you need?

Method 1, very accurate.
Convert to floating point, divide by 32,000 then multiply by 60.

Method 2, not very accurate.
Divide by 533, you get an integer value from zero to 60.

Keeper523 · Feb 22, 2005

In both cases you need to insure that your value is not equal to 0

Doug_Adam · Feb 22, 2005

Zero in the neumerator should be OK.

Keeper523 · Feb 22, 2005

your correct I apologize reation quicker than thought

siemens s7 200

Crunky

Member

Doug_Adam

Member

Keeper523

Member

Doug_Adam

Member

Keeper523

Member

Similar Topics