Control logix 5000 communication with factory talk

kbn_120184

Member
Join Date
Aug 2012
Location
usa
Posts
85
HI
I want to have control logix 5000 communication with factory talk.can u plz help me with the procedure .how to communicate with rs logix 5000
 
Use RSLinx if you want to communicate to the controller with you computer and for FactoryTalk FT you will use RSLinxenterprize to communicate with the controller. You will need to create a shortcut under the communication in FT.
Also, which FT are you talking about..SE or ME because this will change things a bit as far as setting up the communications.
 
Factory talk issue

Hi
I just want to insert a picture in factory talk as shown in below.and i want to have communication with rs control logix. so plz can u tell me how can i do it and communicate it with rs control logix 5000.

io chassisHMI.jpg
 
FactoryTalk is the name of about a dozen different Rockwell products. Which FactoryTalk Product are you referring to?

You also mentioned RSLogix 5000 which is the programming software for the ControlLogix. Is that a separate request?

It is difficult to understand your communications in this and previous posts. I realize it may be difficult if English is not your native language, but please refrain from the use of SMS type language. It only complicates comprehension.

OG
 
sorry for incomplete information given above
factory talk view studio and i want to insert that picture which i have given above. i have to make the graphics .so can u tell me how to insert that picture into factory talk veiw studio . I am working on allen bradley panel veiw graphics.so i want to insert that picture can u help in this
 
Is your image a bitmap (*.bmp) or jpeg file?

In the left hand side explorer window can you see a folder called graphics, and then under this folder there is a heading Images.

If you can right click on the word images, you can add "a component" to your application - you can add an image file here...

On your graphic display, from the heading objects select drawing, then image. draw a box for your image & select it from the list of available images.

Good Luck
 

Similar Topics

Hi all, I'm going to start programming a 1756-L73 and I'm still waiting for the full Studio5000 to be able to start at it in earnest. But I...
Replies
5
Views
385
Folks, Putting together a system utilizing a Control Logix Gen 8 (5580) PLC w/ the L83e CPU. I'll be connecting to 8 different FLEX-IO drops...
Replies
13
Views
3,995
In studio 5000, is there a way to write a force mask into a rung? Long story short, I would like to create a test routine for a FAT test. In...
Replies
7
Views
1,238
Hello, I was trying to create new module in I/O Configuration and I get the "Fatal Application Error" Below is my plc setup if I need to try...
Replies
6
Views
1,494
Hi, I am new on RSLogix 5000 programming. Now I am starting a auto machine project and want to control machine process sequentially. I prefer to...
Replies
6
Views
1,570
Back
Top Bottom