Allen Bradley Micro 850 communicating with Delta dop-b series

SwSa

Member
Join Date
Jan 2010
Location
Westerncape
Posts
2
Hi All

I am having troubles with communication between plc(micro850) and hmi(Delta Dop-b)
Have any one successfully did a connection between Micro 850 plc & Delta HMI Dop-B series that could shed some light for me or show me in the right direction?

The HMI is serial connection only.

Help would be much appreciated

Thanks
 

Similar Topics

This unit was removed from one project where it had perfomed nicely. Wired into simulator and we have no signs of life no LED,s lit power...
Replies
2
Views
917
Hello Everyone, Hope you all are doing well. I am new to the PLC and communication protocols used in PLC. I am currently stuck with Allen...
Replies
47
Views
13,720
Hi all, I have problem that I could do with some help with: I have a setup consisting of an Allen Bradley Micro 820 controller, Panelview 800 and...
Replies
6
Views
3,021
I have an allen Bradley micro running a fan in an industrial paint mixing facility. The input fuse is 3a. The system will run fine for a bit and...
Replies
4
Views
1,967
Found a couple of old unused Micro 810s with lcd displays in the miscellaneous section. Don't ever use ccw or indeed any Allen Bradley, but...
Replies
12
Views
4,105
Back
Top Bottom