Usually we want to do the opposite, but I'm actually looking for opposite, I need to slowdown my Siemens S7-1518 OB1 execution time, to say, 20 ms.
This is not needed for real application, I need it to test my software on PLC which simulates real process. From what I see our standardized library has issues if scan time is too low (around 1ms like now).
When we download entire project scan time will surely be larger, but to test parts of SW I need to slowdown a PLC so I can avoid issues coming from such low cycle time.
Any ideas?
This is not needed for real application, I need it to test my software on PLC which simulates real process. From what I see our standardized library has issues if scan time is too low (around 1ms like now).
When we download entire project scan time will surely be larger, but to test parts of SW I need to slowdown a PLC so I can avoid issues coming from such low cycle time.
Any ideas?