Controllogix & Markem-Image SmartDate X40

Yasir Maqsood

Member
Join Date
Jul 2018
Location
Pakistan
Posts
3
I am working on a project where i need to communicate Markem-Imaje SmartDate X40 with Allen Bradley ControlLogix PLC over Ethernet. The requirement is to change the Job Number from PLC. If anyone has experience on this particular application, please share the procedure.



Yasir Maqsood
 

Similar Topics

I am working on a project where i need to communicate Markem-Imaje SmartDate X40 with Allen Bradley ControlLogix PLC over Ethernet. The...
Replies
0
Views
1,271
We've had this working over RS232 for several years using AWT and ARD ASCII commands in the Controllogix program. Markem has now unleashed an...
Replies
6
Views
10,977
Anyone work with this printer and interface with a Controllogix platform? I am assuming ethernet IP with MSG instructions but I could be wrong...
Replies
2
Views
1,851
Hi everyone i have a customer, who wants to show an alarm on the machine, if the I/O forces are enabled and set, on at ControlLogix L81E with...
Replies
3
Views
136
Does anyone know of a way to detect if someone is online with the controller in ControlLogix (from logic) I'm thinking that maybe there is a CIP...
Replies
7
Views
291
Back
Top Bottom