OI gateway

RY_Guthrie

Member
R
Join Date
Nov 2011
Location
Las vegas, NV
Posts
263
I am using WW version 2017 sp 2 to communicate with a control logix 5000 l72 processor. WW tech support is suggesting i use the OI gateway to communicate with the DASABcip server to plc, i was wondering if anyone had link or an example of how this setup would look like? thanks!
 

Similar Topics

Q
Updating IP Gateway of ENBT card in a Redundant Configuration
Hi All, Has any of you tried to change the IP Gateway of the PLC (of course, essentially of the ENBT card), while in a redundant configuration...
Replies
3
Views
127
QasimFSH
Q
Cotafam
Do I need to add our Gateway to the device list on the Allen Bradly CompactLogix 1769 in in order to communicate
We are trying to poll data coming from a PLC for remote monitoring we have the IP address of the PLC and the default port number and the path is...
2
Replies
25
Views
571
Cotafam
Cotafam
M
Prosoft AN-X4 DH+ to Ethernet Gateway -- setting up HMI
Hello. I am trying to use a Prosoft AN-X4 to improve the communications for a new panelview plus 7. This is going from a SLC-500 through DH+ to a...
Replies
9
Views
286
TheWaterboy
TheWaterboy
Dayvieboy
How to Allen Bradley get PLCs onto the corporate network without RS-Linx Gateway?
I have been looking to this and thought I'd ask for input from others before I take it in a wrong direction. The guy who used to set these up...
Replies
9
Views
404
Dayvieboy
Dayvieboy
S
CompactLogix Controller resetting IP Gateway at machine startup
Hi, I recently installed 2 1783-NATR devices into two of our machines. The machines are pretty much identical, both having 1769- L24ER-QFC1B...
Replies
4
Views
298
squiggz
S
Back
Top Bottom