Good afternoon ya'll....looking for someone who has a good handle on the load memory siemens uses, aka the MMC cards that are inserted and are required for CPU operation.
The problem I have, is under the CPU Messages....The load memory appears to be 96% full. The work memory is only at 32%. I still have to add some logic to the Processor...will the load memory be affected by that?
If I was to add a larger MMC to the processor, would that take care of the problem? I don't know if that 96% is the load memory total, or just on the CPU....(is it counting the MMC in that load memory calculation). Also, will the compression compress the Load Memory?
Any comments would help. The machine is in a faraway land, and I cannot access the CPU remotely.
Thanks in advance guys!
Hayzed1
The problem I have, is under the CPU Messages....The load memory appears to be 96% full. The work memory is only at 32%. I still have to add some logic to the Processor...will the load memory be affected by that?
If I was to add a larger MMC to the processor, would that take care of the problem? I don't know if that 96% is the load memory total, or just on the CPU....(is it counting the MMC in that load memory calculation). Also, will the compression compress the Load Memory?
Any comments would help. The machine is in a faraway land, and I cannot access the CPU remotely.
Thanks in advance guys!
Hayzed1