1394 servo controller question

D. Woehlke

Member
D
Join Date
Nov 2008
Location
Michigan
Posts
2
I have an old 1394 servo controller running off of a AB 1746HSRV card. I took this and the ladder logic from the old machine and adapted it to the new. The problem I am having is I changed the pitch af the ballscrew the servo was turning and I don,t know how to adjust this in the ladder data files. Anyone know what I need to do? I can E-mail the program to whoever knows these systems and can give me a hand. Everything is working but commanding a 1 inch move gives me 3+ inches on the actuator.
Thanks in advance,
Dave
 

Similar Topics

euipfacil
problems with 1394 gmc digital servo controller
I'm new at this but anyway, I have a 1394 Gmc digital controller set up to cut rubber extrusion. Problem; when the count reaches 1999 it faults...
Replies
7
Views
6,725
euipfacil
euipfacil
D
Upgrading 1394 Digital Servo Drive to Kinetix 5700
I am looking to upgrade some of our old Servo Drives to the newer kinetix 5700 style. currently we have 4 1394 axis that are all driven by 5kw...
Replies
1
Views
879
jholm90
J
B
1394 servo issue
I have an Allen-Bradley 1394 servo drive that is giving me an intermittent over-travel fault. (a couple of times a day) This system has be...
Replies
2
Views
2,262
bill4261
B
P
1394 servo and RIO
We are replacing a 1394 controller and I am trying to decipher the RIO side of the controlling PLC (SLC) I am at a loss as to how the addresses of...
Replies
3
Views
2,037
JeffKiper
JeffKiper
S
AB 1394 Servo controllers test/repair
I am looking for a person that has the skill/knowledge to test/repair AB 1394 Servo controllers using GML Commander. Please contact me asap. Thank...
Replies
0
Views
1,738
sifis
S
Back
Top Bottom