mr_b_at_work
Member
Hi Folks
I was wondering whether you can use point io in order to communicate with an SLC 5/03 processor. I am thinking of using a 1734-AENT with a 1734-485ASC module added on.
Once the processor is connected to the 485ASC module is it then possible to hook the laptop up to the ethernet port on the AENT and set up comms in order to go online with the processor.
The reason for this is that the current setup has a PV700 connect straight to the processor with 485 and the com port on the processor is in use.
Any advice appreciated.
I was wondering whether you can use point io in order to communicate with an SLC 5/03 processor. I am thinking of using a 1734-AENT with a 1734-485ASC module added on.
Once the processor is connected to the 485ASC module is it then possible to hook the laptop up to the ethernet port on the AENT and set up comms in order to go online with the processor.
The reason for this is that the current setup has a PV700 connect straight to the processor with 485 and the com port on the processor is in use.
Any advice appreciated.