communication betwenn SLC5/5 and wonderware on ethernet (TCP/IP)

muralidharjk

Member
M
Join Date
Mar 2008
Location
BANGALORE
Posts
16
Dear All

Please let me know the procedure of communication betwenn SLC5/5 and wonderware on ethernet (TCP/IP). Which driver i need to install.

THANKS
mjk
 
Use DASABTCP. There's a technote that describe how set it up to a PLC5 but should be similiar for an SLC.
 

Similar Topics

H
No communication with PLC 90-70
Hello We have installed several G.E. Fanuc 90 70 PLC Everything was ok but suddenly we can not communicate anymore with any PLC with the software...
Replies
0
Views
31
Hazatov
H
Voltimus
IDEC PLC to PLC modbus communication
Apologies for not being the best IDEC programmer. I recently was doing some inspections on a site that had 3 FC6A IDEC processors. The issue is...
Replies
0
Views
51
Voltimus
Voltimus
S
Modbus communication help
Hi all I need help on this As in my project used Schneider TM241 controller. Now I want to communicate Elite energy meter with controller by...
Replies
3
Views
116
Corsair
C
Y
Communication between Delta plc DVP12SA2 and Arduino using MAX 485 module.
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Replies
4
Views
84
yawin
Y
C
Mitsubishi R08SFCPU and RD78G8 communication to FR-E800SCE (Safety Version) on CC-link IE TSN
I'm struggling to get an FR-E800SCE to work on CC-Link IE TSN. I'm sure the issue is with the drive, when I plug in the network cable I get no...
Replies
1
Views
90
cottagewood
C
Back
Top Bottom