forqnc
Lifetime Supporting Member
Hi all, hoping someone can help me out.
I have a project designed in myDesigner which requires a numerical input from an operator. I watched a video showing how to draw a rectangle insert a value and assign a tag. Then go into the commands prompt and under write/set I set up 'on click' to be a numerical value. This worked for my original testing. I then went to add some more by copy/paste, I adjust the necessary tags, but now they don't work.
I get the popup numerical keypad and I enter a number, but when I press the enter button on the keypad it does not change in the PLC (N7:100 and N7:200)
I emailed mySCADA support and they said it was something in the PLC as they had my program working using modbus.
I cannot think of any reason the MicroLogix is not accepting the change.
It is a brand new PLC, I tried clearing the memory and reloading the program but still did not work.
Any assistance appreciated.
I have a project designed in myDesigner which requires a numerical input from an operator. I watched a video showing how to draw a rectangle insert a value and assign a tag. Then go into the commands prompt and under write/set I set up 'on click' to be a numerical value. This worked for my original testing. I then went to add some more by copy/paste, I adjust the necessary tags, but now they don't work.
I get the popup numerical keypad and I enter a number, but when I press the enter button on the keypad it does not change in the PLC (N7:100 and N7:200)
I emailed mySCADA support and they said it was something in the PLC as they had my program working using modbus.
I cannot think of any reason the MicroLogix is not accepting the change.
It is a brand new PLC, I tried clearing the memory and reloading the program but still did not work.
Any assistance appreciated.