Balluff EtherNet/IP IO

I am using AB CompactLogix PLC (L18ER). And Balluff Eathernet IP(BNI EIP-302-105-Z015) as remote IO.

So I want to know How Create remote I/O TAG in RS Logix5000?

And How to add Balluff Remote I/O in Hardware ??

Typically, one would add the module into your IO Configuration which would automatically create the tag for you. I found the EDS on this page through usual search engine:

http://www.balluff.com/balluff/MUS/en/products/product_detail.jsp#/210043/downloads