slc5/04--pc cable pinout
- Thread starter platipus
- Start date
rsdoran
Lifetime Supporting Member
Allen Nelson
Member
It's standard null-modem. For a 9-pin to 9-pin, thats 2-3, 3-2, 5-5. For a 9-to-25, it's 2-2, 3-3, 5-7.
Usually I just use ribbon cable (since I know its pinout) and a Radio Shack null modem adapter, with the appropriate gender & 9-25 converters.
This cable kit will connect to 90%+ of all PLCs & HMIs that allow RS-232 communication. If null modem doesn't work, straight through usually does. I've added a cheap breakout box to the kit, for those times where I need a custom cable, but have yet to use it.
Usually I just use ribbon cable (since I know its pinout) and a Radio Shack null modem adapter, with the appropriate gender & 9-25 converters.
This cable kit will connect to 90%+ of all PLCs & HMIs that allow RS-232 communication. If null modem doesn't work, straight through usually does. I've added a cheap breakout box to the kit, for those times where I need a custom cable, but have yet to use it.
Similar Topics
Tried a straight through 9-pin RS-232 and a null model cable. No luck so far.
Hi Everyone,
I need to know how to communicate panel view 600 plus with slc 5/03 via serial cable NC-13 if any body know this technique please let...
Does anyone know if it is detrimental to use a FULL straight through cable to connect these two. I know that the AB cable does not carry pin 9...
I'm looking to make myself that cable. Anyone knows where I can find this cable pinout?
Completed alot of .pdf's, Still unsure what direction to proceed.
Want to use SLC/5/03 OS302 B Rev10.Channel-0 [DH485] [9-Pin] to SP10 Com-2 RS485...