1769-L30ER Run Mode Issue

We have a CompactLogix 1769-L30ER that controls our water system at our plant. When we came in this a.m. we found the processor had a major fault. We are able to clear the fault and download the program, but whenever we try to put the processor in Remote/Run or Run Mode it faults out with a Code 60 fault. We have isolated all the field devices and HMI from the processor and it is still faulting out. Any feedback/ideas of what the issues are will be greatly appreciated.

The Logix manual says code 60 unrecoverable fault..

Not much help otherwise, is it?

Sorry, never had that one before

Check this Technote: Major Non-recoverable Fault Editing a Constant Structured Tag
https://rockwellautomation.custhelp.com/app/answers/detail/a_id/1070688

Segen,
For a non-recoverable fault like you are experiencing you will need to contact RA technical support. Link to get you started.

67083 - Steps to take and information to record if you experience a fault (L2x and L3x)

Thanks for the information guys, we ended up replacing the processor and it's all good now.