MorphuisOGrady
Member
Hi,
Anyone familiar with the PlantPAx library?
I have a few simple devices I need to control. 2 outputs for open/close and 2 inputs for status opened/closed.
I could use a P_Valve or P_Pump object and rename it but curious if sometime already exists for a simple 2 state device.
Thanks in advance
Anyone familiar with the PlantPAx library?
I have a few simple devices I need to control. 2 outputs for open/close and 2 inputs for status opened/closed.
I could use a P_Valve or P_Pump object and rename it but curious if sometime already exists for a simple 2 state device.
Thanks in advance