Desoutter Torque Controller - PLCS.net

Gadelric · January 26th, 2021, 02:36 PM

Quick question,

I have a Desoutter cvic 2 controller that I was asked to make it mobile.
It is currently mounted to a huge station on wheels, that is just too big.
We would like to mount this to a smaller station that we can wheel around, and just plug it into a 115 v AC outlet.

This current set up has a PLC and low voltage.
Does anyone here know if we can set this thing up without a PLC/low voltage.
I don't need to record torque data or anything, just need to put some screws into foam, and this tool works the best for what they want to do, I just gotta make it work.

Mounting a small enclosure to house a small PS can be done, I just don't want to if I don't have to.

No reply from the manufacture,yet, so I thought maybe I could get lucky here.

Gad.

Gadelric · January 26th, 2021, 03:35 PM

Found my answer,

These controllers can supply their own 24v dc, there is a jumper that has to be put in to jump 24vdc to the enable, and then they become stand alone.

January 26th, 2021, 02:36 PM	#1
Gadelric Member Join Date: Nov 2018 Location: Midwest Posts: 106	Desoutter Torque Controller Quick question, I have a Desoutter cvic 2 controller that I was asked to make it mobile. It is currently mounted to a huge station on wheels, that is just too big. We would like to mount this to a smaller station that we can wheel around, and just plug it into a 115 v AC outlet. This current set up has a PLC and low voltage. Does anyone here know if we can set this thing up without a PLC/low voltage. I don't need to record torque data or anything, just need to put some screws into foam, and this tool works the best for what they want to do, I just gotta make it work. Mounting a small enclosure to house a small PS can be done, I just don't want to if I don't have to. No reply from the manufacture,yet, so I thought maybe I could get lucky here. Gad.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
How difficult is it to update a program in the field on a password protected Micro820	RMore	LIVE PLC Questions And Answers	18	November 6th, 2019 05:59 PM
Need help - can't go online and upload project from 1756-L63 controller	Oleksandr_Husyev	LIVE PLC Questions And Answers	3	February 7th, 2018 08:22 AM
what is the difference between continuous stall torque and rated torque	aacmpy	LIVE PLC Questions And Answers	1	August 27th, 2017 10:53 AM
Totally off topic....... puzzle	AndyT	LIVE PLC Questions And Answers	133	May 25th, 2005 12:02 PM
MM440 micromaster Max Torque control	userxyz	LIVE PLC Questions And Answers	4	April 9th, 2005 06:16 AM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.*

January 26th, 2021, 03:35 PM	#2
Gadelric Member Join Date: Nov 2018 Location: Midwest Posts: 106	Found my answer, These controllers can supply their own 24v dc, there is a jumper that has to be put in to jump 24vdc to the enable, and then they become stand alone.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)