PowerFlex 525 "Missing Databases"

I'll try to save you the trouble, the AOP you want is named:

Product: AOP for PowerFlex Drives and SMCs (all Logix versions) v5.07
Version: 5.07.00

There are others that will confuse you into downloading old AOP's, they are properly named "PowerFlex 525". Don't fall for it.
 
I downloaded that exact file and it still says same message. Is there a setup file within the download or something?
 

Similar Topics

Are the N files in the 525 the same as the 40p for ethernet? (E-Comm card) I have used 40P with Micrologix 1400 Messaging but don't see the N...
Replies
0
Views
50
Hey all, I am currently working on a depalletizer for a customer and we are doing a hoist upgrade. This is a SLC500 processor and the drives are...
Replies
6
Views
179
Hi I got a powerFlex 525 AC Drive (used) i changed parameter t053 to 2 to do factory reset and now i have both parameters 46 and 47 on 1 but cant...
Replies
2
Views
130
Got this new to me powered on today and have no main air and the only problem I have found is the f059 on the vfd. S1 has 24v, none on S2, and 48v...
Replies
10
Views
332
So our Powerflex 525's are set up to allow REMOTE operation from PLC through network. But if network is lost we want to be able to run in LOCAL...
Replies
5
Views
483
Back
Top Bottom