grra Member G Join Date Oct 2020 Location laguna Posts 2 Oct 26, 2020 #1 Hi guys I need help I'm having trouble when uploading the program of Hitech HMI model PWS6A00T. it was successfully uploading the program but when I click the reconstruct source the ADP software suddenly crash Thank you in advance
Hi guys I need help I'm having trouble when uploading the program of Hitech HMI model PWS6A00T. it was successfully uploading the program but when I click the reconstruct source the ADP software suddenly crash Thank you in advance
goghie Lifetime Supporting Member G Join Date Jan 2008 Location Belgrade Posts 800 Oct 26, 2020 #2 Check if "block optimization" is enabled for all blocks in the application. It is found under Screen -> Properties -> Read blocks. It should be on.
Check if "block optimization" is enabled for all blocks in the application. It is found under Screen -> Properties -> Read blocks. It should be on.
grra Member OP G Join Date Oct 2020 Location laguna Posts 2 Oct 26, 2020 #3 Thanks, goghie It's already checked the box optimization. by the way I did try version 6.13,6.12.and 6.11 from free download. SW.it could be the software issue?
Thanks, goghie It's already checked the box optimization. by the way I did try version 6.13,6.12.and 6.11 from free download. SW.it could be the software issue?