Hello,
Please I need help!
I want to realise a DeviceNet network with: the 1747 SDN , the 1770 KFD and the CDN 066.
I have a deviceNet cable witch is connect by the 1770 KFD directly to the 5 linear pin of the 1747 SDN.
After make the configuration of the driver in RSLinx, I observe that the 1770 KFD recognize the CDN066 in the network but, don't recognize the 1747 SDN and have an error code 91. (bus off)
I have read the 1747 SDN user manual and they say that the red wire of the 1747 SDN must be at 24 VDC. I have meseare the voltage between the red wire and the black wire of the 1747 SDN and I found 12.5VDC.
Otherwise, I have read also the datasheet of the 1770 KFD. and they say that the voltage that the 1770 KFD give out is about 12VDC.
Please, I want to know how can I supplied the DeviceNet power of 1747 SDN at 24 VDC while the 1770 KFD give out 12 VDC?
Thank you.
Please I need help!
I want to realise a DeviceNet network with: the 1747 SDN , the 1770 KFD and the CDN 066.
I have a deviceNet cable witch is connect by the 1770 KFD directly to the 5 linear pin of the 1747 SDN.
After make the configuration of the driver in RSLinx, I observe that the 1770 KFD recognize the CDN066 in the network but, don't recognize the 1747 SDN and have an error code 91. (bus off)
I have read the 1747 SDN user manual and they say that the red wire of the 1747 SDN must be at 24 VDC. I have meseare the voltage between the red wire and the black wire of the 1747 SDN and I found 12.5VDC.
Otherwise, I have read also the datasheet of the 1770 KFD. and they say that the voltage that the 1770 KFD give out is about 12VDC.
Please, I want to know how can I supplied the DeviceNet power of 1747 SDN at 24 VDC while the 1770 KFD give out 12 VDC?
Thank you.