p & g signal conditioner to analog input card

jimbom

Member
Join Date
Jul 2002
Location
Buffalo, NY
Posts
19
has anyone used a penny and giles linear position sensor with an EICT signal conditioner module? I am using this combination to send a signal to a SLC 5/05 ab processor with a 1746-ni8 analog input card. Nothing seems to work. Tech support has not been a lot of help.
 

Similar Topics

Hello Everyone, Happy Thursday! I have a system, and 99% of my analog signals are 4-20 ma. I have 4 analog outputs that are 0 - 10V I have 4...
Replies
3
Views
1,410
All, This should be easy but I'm finding it difficult. I have an older OEM piece of equipment that I need to send a 0-5 vdc analog command...
Replies
5
Views
1,928
Hi All, I'm on the hunt for an analog signal conditioner that can do the following: I have a 10k pot joystick that is spring-return-to-center...
Replies
6
Views
4,133
Hey folks, I have a situation where I need to connect a 4-20mA transmitter to an AI card that only does 0-20mA. On top of that it only has 8 bit...
Replies
4
Views
2,378
I have a Allen Bradly Signal Conditioner card (931S-B1C6D-DC) hooked up to a strain gauge. The excitation voltage is 10V, the output is 4-20 ma...
Replies
8
Views
1,987
Back
Top Bottom