Omron CX Programmer 9.34

Dear Guys and Masters,

I need help...
does any body knows and explain please why I got the following error during load a program to PLC :,thanks all.....

---------------- PLC: 'DS_2130EC' (PLC Model 'CP1H Y' ) ----------------
Compiling...
[PLC/Program Name : DS_2130EC/main]
[Ladder Section Name : Init]
[Ladder Section Name : boi]
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 10 ( 0, 14 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 10 ( 0, 12 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 11 ( 0, 17 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 11 ( 0, 13 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 12 ( 0, 25 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 12 ( 0, 20 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 12 ( 0, 16 ).
[Ladder Section Name : zms]
WARNING: Symbol P_Cycle_Time_Value's data type (UDINT) is not compatible with the data type (DINT) for this instruction operand at rung 7 ( 6, 0 ).
[Ladder Section Name : meldungen_stoerungen_sps]
[Ladder Section Name : meldungen_stoerungen_bo]
[Ladder Section Name : zms_auftrag]
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 19 ( 0, 9 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 19 ( 0, 8 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 19 ( 0, 6 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 19 ( 0, 4 ).
[Ladder Section Name : MC__Baumantrieb_14_A1]
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 9 ( 0, 4 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 9 ( 0, 2 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 24 ( 0, 5 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 24 ( 0, 3 ).
[Ladder Section Name : MC__Ü_Walze]
[Ladder Section Name : MC__diverses]
[Ladder Section Name : WA__WA_antrieb_18_A1]
[Ladder Section Name : WA__diverses]
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 0 ( 0, 17 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 0 ( 0, 15 ).
ERROR: Operand 1 Invalid Literal at rung 1 ( 1, 4 ).
ERROR: Operand 1 Invalid Literal at rung 1 ( 1, 6 ).
ERROR: Operand 1 Invalid Literal at rung 1 ( 1, 5 ).
ERROR: Operand 1 Invalid Literal at rung 1 ( 1, 3 ).
ERROR: Operand 1 Invalid Literal at rung 2 ( 2, 7 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 4 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 3 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 18 ( 0, 6 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 18 ( 0, 5 ).
[Ladder Section Name : Gatter]
[Ladder Section Name : Auftragsmessung]
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 3 ( 0, 12 ).
ERROR: Operand 1 Invalid Literal at rung 6 ( 3, 7 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 3 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 8 ( 0, 3 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 16 ( 0, 2 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 19 ( 0, 2 ).
[Ladder Section Name : counter]
[Ladder Section Name : boo]
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 2 ( 0, 18 ).
ERROR: Operand 1 Invalid Literal at rung 14 ( 2, 7 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 16 ( 0, 1 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 18 ( 0, 13 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 21 ( 0, 5 ).
ERROR: Operand 1 Invalid IEEE Floating Point format at rung 21 ( 0, 4 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 21 ( 0, 3 ).
[Ladder Section Name : END]
[PLC/Program Name : DS_2130EC/subroutinen_global]
[Ladder Section Name : sub1_speed_counter]
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 1 ( 0, 5 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 3 ( 0, 4 ).
[Ladder Section Name : sub3_skalierung_bremsen_folgeachsen]
[Ladder Section Name : sub4_skalierung_pv_propvent]
[Ladder Section Name : sub5_letzter_bremsweg]
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 1 ( 0, 4 ).
[Ladder Section Name : sub6_wind_laenge]
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 1 ( 0, 22 ).
[Ladder Section Name : sub7_geschwindigkeiten]
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 1 ( 0, 10 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 1 ( 0, 7 ).
[Ladder Section Name : sub8_letzte_bremszeit]
[Ladder Section Name : sub9_reset_stack]
[Ladder Section Name : sub11_F7Z_read_write]
[Ladder Section Name : sub12_solldrehzahlen]
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 2 ( 0, 6 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 2 ( 0, 4 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 2 ( 0, 3 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 3 ( 0, 6 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 3 ( 0, 4 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 3 ( 0, 3 ).
[Ladder Section Name : sub13_skalierung_antriebe]
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 2 ( 0, 3 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 3 ( 0, 8 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 3 ( 0, 6 ).
[Ladder Section Name : sub18_master_folgetabelle_write]
[Ladder Section Name : sub19_mastertabelle_read]
[Ladder Section Name : sub23_delete_bremsweg_zeit]
[Ladder Section Name : sub24_rampen_baum]
ERROR: Operand 1 Invalid IEEE Floating Point format at rung 1 ( 0, 14 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 1 ( 0, 11 ).
ERROR: Operand 1 Invalid IEEE Floating Point format at rung 1 ( 0, 8 ).
ERROR: Operand 1 Invalid IEEE Floating Point format at rung 1 ( 0, 4 ).
[Ladder Section Name : sub25_push_stack_modbus_register]
[Ladder Section Name : sub600_603_mittelwert]
[Ladder Section Name : END]
[PLC/Program Name : DS_2130EC/speed]
[Ladder Section Name : init_speed_counter]
[Ladder Section Name : END]
[PLC/Program Name : DS_2130EC/_INV002_Refresh]
[PLC/Program Name : DS_2130EC/_INV201_ReadParameter]
[PLC/Program Name : DS_2130EC/_INV401_WriteParameter]
[PLC/Program Name : DS_2130EC/hyst_cmp_int_V001]
[PLC/Program Name : DS_2130EC/MP_AVG_Float_V001]
[PLC/Program Name : DS_2130EC/PID_stetig_range_V005]
[PLC/Program Name : DS_2130EC/PID_stetig_range_V007]
[PLC/Program Name : DS_2130EC/rampe_uint]
[PLC/Program Name : DS_2130EC/Scale_dint_real_V002]
[PLC/Program Name : DS_2130EC/Scale_int_V002]
[PLC/Program Name : DS_2130EC/Scale_real_real_V001]
[PLC/Program Name : DS_2130EC/Scale_uint_V002]

DS_2130EC - 58 errors, 1 warning.

Your word types for your DMs are incorrect - probably integer instead of floating point. If this is the case, the software will still work. If your DMs have symbols change them to floating point type words.

BobB is usually correct, but this time I don't think so.
IF CXP is logging the rung as an ERROR it did not compile correctly. I suspect your program will not run in the PLC.
It appears that your entry format for IEEE numbers is incorrect. Could you post a screen print of one of the ERROR rungs??

Thanks for reply,herewith screen print of one the error rung.
For your information,this program I download already to 5 PLCs without any mentioned issue,however somehow I tried to download to 6th PLC,I got this issue and I didn't modified any of this program and I use a same version of CX programmer.
Please kindly advise guys...
http://i1088.photobucket.com/albums/i339/warpknitting4u/errorrung7.jpg

Have you changed PC or changed your Windows settings for (,) (.) ??
I think this is your problem

Banker

I was not able to open your link, but if the program loaded into some PLC's and not others then the ERROR message you are getting is somewhat misleading.
The compile listing says it is a CP1H-Y PLC. Is that correct and is it the same for all of the PLCs?? The fact that it works in some PLCs but not others indicates either a model or version number problem.

AARRGH! You are correct my apologies - I responded on the fly as I went out the door. The common error is Incorrect Data Type which does not really matter. Definately need to see at least one rung.
Have all constants and values been converted to floating point before use?

I finally got your image to open. It appears the those entries are +1.E+2 (the image is a bit fuzzy).
Try changing them to +1.0E+2 or just +10 to see if that cures the error message.
Try just that one rung first and see if your error count goes from 58 down to 56. That will tell you whether it is worth changing the rest of them.

Dear All,

thanks a lot for all your advises,the problem has been resolved,replaced (,) with (.) on the entries which has an error.

But still curious and confuse,how it can be change on windows (maybe) as Banker wrote....in which setting is it...'Language Bar setting' or others ......????????

Yes this in your windows settings. Very bad when you share programs with other programmers with other settings.