I would like to VNC to my HMI's but the only access I have is via the Ethernet modules in the CLX chassis. One of the modules is on the PLC network and the other module is on the HMI network. Is there a way to route from my PC to the HMI???
The problem is bridging between the two Ethernet modules.
Thanks
Here is the path I need to take....
PC with VNC Viewer (192.168.1.200)
.
.
1756-L83E Slot 0 (192.168.1.100)
.
.
Backplane
.
.
1756-ENBT Slot 1 (175.10.1.122)
.
.
Panelview Plus ME (175.10.1.128)
The problem is bridging between the two Ethernet modules.
Thanks
Here is the path I need to take....
PC with VNC Viewer (192.168.1.200)
.
.
1756-L83E Slot 0 (192.168.1.100)
.
.
Backplane
.
.
1756-ENBT Slot 1 (175.10.1.122)
.
.
Panelview Plus ME (175.10.1.128)