How To Backfill data from InSQL into SQL Alarm/Event Table

BillyB

Member
B
Join Date
Aug 2006
Location
Cork
Posts
24
Hi all,
Anybody know how To Backfill data from InSQL into SQL Tables. Our reports started coming out blank since 25th March.

A quick look in the WWALMDB table showed that no alarm or event Data had been added since 25th March.
We dont know why this happened(possible ODBC issue!!)
One of the guys observed that some Tables in the Runtime DBase contained the missing data.

What do we need to do to backfill this Data.

Any info appreciated
BB
 

Similar Topics

A
reading data from siemens controller (profinet) to ethernet/IP controller
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
5
Views
95
bkottaras
B
P
WinCC RT Advanced - Data Logging Memory
Hi folks, I'm not as accustom with Siemens & WinCC, however I've been asked to increase the amount of data an existing application is logging...
Replies
2
Views
65
Plantationpark
P
P
Migrating Proficy Historian data to a new server (essentials edition)
Has anyone migrated Proficy Historian data to a new server? I followed the guide to move all the data over, but when I run the utility, it stops...
Replies
0
Views
46
phuz
P
U
SLC500 analog input value data type for EZ Series HMI
I cannot add SLC500 analog input tag (I: 8.3) to EZSeries Touch Panel Editor (V 5.3). I used all the listed tag datatype but it all says "Invalid...
Replies
10
Views
257
OkiePC
OkiePC
U
Data logging in PLC or HMI
Hi, Wy we log data in PLC using DLG instruction, when we have option to log data in HMI
Replies
1
Views
80
JesperMP
JesperMP
Back
Top Bottom