martinshaw
Member
Hi
I have just been out to an RSView32 V7.50.00 application. They have a popup that displays over any display when a condition becomes true in the connected PLC. The popup can be closed if the condition is acknowledged or the condition goes false. In this context, it works correctly.
However, the problem they have presented to me is that if the popup comes on and they don't close it, but they navigate to a different display, the popup disappears, even though the condition causing the popup is still true in the PLC.
I have checked the display settings and the popup display is set as 'on top' and the underlying displays are set as 'replace'. My take on this is its doing exactly what it its being told to do, so is there a mechanism to keep the popup on the screen even if navigating to different displays?
Thanks
Martin
I have just been out to an RSView32 V7.50.00 application. They have a popup that displays over any display when a condition becomes true in the connected PLC. The popup can be closed if the condition is acknowledged or the condition goes false. In this context, it works correctly.
However, the problem they have presented to me is that if the popup comes on and they don't close it, but they navigate to a different display, the popup disappears, even though the condition causing the popup is still true in the PLC.
I have checked the display settings and the popup display is set as 'on top' and the underlying displays are set as 'replace'. My take on this is its doing exactly what it its being told to do, so is there a mechanism to keep the popup on the screen even if navigating to different displays?
Thanks
Martin