I am looking to detect the RPM/speed of a conveyor belt using a Micro820 processor and a magnetic sensor.
The magnetic sensor would pickup the teeth of a timing sprocket which would be connected to a digital input on the 820 processor.
My question is, how would I program the Micro820 to read the DI and display the RPM/speed on the HMI??
I have been messing around with Connect Components Workbench to try and figure it out for the past 2 days with no success. This is my first project with CCW.
I am using this hardware because we already had it available to use.
Any ideas?
The magnetic sensor would pickup the teeth of a timing sprocket which would be connected to a digital input on the 820 processor.
My question is, how would I program the Micro820 to read the DI and display the RPM/speed on the HMI??
I have been messing around with Connect Components Workbench to try and figure it out for the past 2 days with no success. This is my first project with CCW.
I am using this hardware because we already had it available to use.
Any ideas?