Per Rockwell Automation Knowledgebase article 61405, the following Series and Revisions of PLC-5E controller support EtherNet/IP: All Series F controllers, Series E revision D.1, and later Series D revision E.1 and later, Series C revision N.1 and later.
We have a PLC-5/80E, Series E revision E.2.
RSLogix5 is showing different Port Configuration options for our controller and a Series F. RSLinx Ethernet/IP driver cannot find our controller, however, the Ethernet driver does find it.
My goal is to utilize the RSLinx Ethernet/IP driver. How can I do this?
We have a PLC-5/80E, Series E revision E.2.
RSLogix5 is showing different Port Configuration options for our controller and a Series F. RSLinx Ethernet/IP driver cannot find our controller, however, the Ethernet driver does find it.
My goal is to utilize the RSLinx Ethernet/IP driver. How can I do this?