Connect Productivity 1000 to distance measuring laser via Ethernet

Hi everyone,
I don't know much of PLCs but it happened that i need to connect Leuze AMS358i Ethernet laser measurement to Productivity 1000 controller.
No matter what I try, I couldn't get any data through.
IP of PLC is 10.13.2.47
IP of the laser is 10.13.2.48
I have EDS file and instructions. Here

Class 4
Instance 1
Attribute 3
Size 32 bit
Data type Dint
Input assembly: length 4 bytes


|Inst. | Byte | Bit7 | Bit6 | Bit5 | Bit4 | Bit3 | Bit2 | Bit1 | Bit0
|..1....|....0..| Position value (low byte)
|........|__1__|Position value
|........|__2__|Position value
|........|__3__|Position value (high byte)