VISHALPATIL3.82
Member
Dear All,
I have to establish the communication between the VIPA PLC CPU315SN-4NE11 & Geo PMAC Motion Controller using the MODBUS RTU Protocol. Also there is one converter (MODBUS SERIAL RS-485 TO MODBUS TCP/IP) in between these two controllers. For VIPA Programming I am using the STEP-7 Software of Siemens.
I have to establish the communication between the VIPA PLC CPU315SN-4NE11 & Geo PMAC Motion Controller using the MODBUS RTU Protocol. Also there is one converter (MODBUS SERIAL RS-485 TO MODBUS TCP/IP) in between these two controllers. For VIPA Programming I am using the STEP-7 Software of Siemens.