Siemens siwarex weighing module indicates "sf" error

Vishal Bhalani

Member

V

Join Date

Nov 2019

Location

Bhavnagar

Posts

5

• Nov 10, 2019

• #1

We are using many Siemens siwarex weighing module. Sometime one of them indicates"sf" error and after replacement of that particular module system works ok.
Please tell me that which kind of hardware fult in siwarex weighing module cause "sf" error in siwarex weighing module???

 

mk42

Lifetime Supporting Member

M

Join Date

Jun 2013

Location

MI

Posts

3,270

• Nov 10, 2019

• #2

Vishal Bhalani said:

We are using many Siemens siwarex weighing module. Sometime one of them indicates"sf" error and after replacement of that particular module system works ok.
Please tell me that which kind of hardware fult in siwarex weighing module cause "sf" error in siwarex weighing module???

Click to expand...

probably all of them. SF usually means "sum fault", or essentially any category of fault.

 

Vishal Bhalani

Member

OP

V

Join Date

Nov 2019

Location

Bhavnagar

Posts

5

• Nov 10, 2019

• #3

As per manual, "SF" means " system fault"

 

JRW

Member

Join Date

Jun 2002

Location

South Carolina

Posts

2,301

• Nov 10, 2019

• #4

What is in the diagnostic buffer?

 

Vishal Bhalani

Member

OP

V

Join Date

Nov 2019

Location

Bhavnagar

Posts

5

• Nov 10, 2019

• #5

Not showing anything

 

Vishal Bhalani

Member

OP

V

Join Date

Nov 2019

Location

Bhavnagar

Posts

5

• Nov 10, 2019

• #6

It it some hardware failure on the PCB.