Siemens siwarex weighing module indicates "sf" error

Vishal Bhalani

Member
V
Join Date
Nov 2019
Location
Bhavnagar
Posts
5
We are using many Siemens siwarex weighing module. Sometime one of them indicates"sf" error and after replacement of that particular module system works ok.
Please tell me that which kind of hardware fult in siwarex weighing module cause "sf" error in siwarex weighing module???
 
Vishal Bhalani said:
We are using many Siemens siwarex weighing module. Sometime one of them indicates"sf" error and after replacement of that particular module system works ok.
Please tell me that which kind of hardware fult in siwarex weighing module cause "sf" error in siwarex weighing module???
Click to expand...
probably all of them. SF usually means "sum fault", or essentially any category of fault.
 

Similar Topics

V
Siemens siwarex weighing module indicates "sf" error
We are using many Siemens siwarex weighing module. From sometime one of them module shows "sf" error and after replacement by spare module...
Replies
0
Views
1,104
Vishal Bhalani
V
R
Siemens capacity fo Siwarex U
Hi everyone, hope you can help me with this I have a S7-1200 and 3 ET200M, I want to connect 2 Siwarex U(weighing module) to each ET200M and...
Replies
4
Views
2,262
steffen_sohl
S
S
Siemens Siwarex Weight module question
Hello, I have problem with signal converting from Siwarex-M module in Simatic S5-115U. Siwarex-M module 7MH4553-1AA41 is placed in ET-200 rack...
Replies
0
Views
3,346
sylwek
S
S
New Siemens Siwarex U modules.
Hi All, Onboard our ship, we have anumber of cranes that are PLC controlled. One of the S7-300 modules for crane loading is of course a Siwarex...
Replies
0
Views
1,865
shaun_nel
S
A
Calling FC-105/106 multiple times in Siemens Step7
This is the first time I am working with Simatic Manager Step7 as I started my siemens journey with TIA which is pretty easy and do a lot of stuff...
Replies
1
Views
27
L D[AR2P#0.0]
L
Back
Top Bottom