RedLion Protocol Converter talking to an Omron NX-SL Safety PLC

mmx4000

Member
M
Join Date
Jun 2008
Location
Ontario
Posts
11
Here's my scenario:

Using a standalone NX-SL3300 with a NX-EIC ethernet IP adapter. I figured I could potentially use the Ethernet/IP Slave driver in Crimson 3, but I can't do much configuration with that driver, and feel like I might be missing the mark.

Anyone have any experience talking to said safety controllers?

Thanks.
 

Similar Topics

M
Redlion Protocol Converter Problem
Hello, We are using a DSP-LE000 REDLION Protocol Converter in one of our client premises to communicate between the AB PLC SLC5/03 & Siemens...
Replies
7
Views
9,511
DanYost
DanYost
D
MultiSmart to Wonderware protocol conversion via RedLion
Hi guys, I've just self taught myself both Modbus and RedLion. I was wondering if someone could have a look at what I am doing with RedLion...
Replies
0
Views
5,339
deltahfturbo
D
M
Redlion G3 - DNP Protocol
Is there a DNP3 protocol driver available for the Red-Lion G3 HMIs? On either the Crimson 2 or Crimson 3 software?
Replies
6
Views
4,413
bastervrugt
B
2
Gem80 ESP protocol to modbus ESP- any suggestions (redlion maybe)?
We’ve been using a Gem80-142 to provide a serial link to a group of starter & drives for finfans and pumps for many years. The GEM80 uses port 1...
Replies
7
Views
8,435
2stepsforward
2
F
Redlion Crimson 3.1 - Touch Tester
Hey guys, hoping someone here could give me a little advice. I'm working with a CR1000-04000 in Crimson 3.1 and I was interested in adding the...
Replies
4
Views
114
forsakenplc
F
Back
Top Bottom