tdamon
Member
I am trying to message between a ControlLogix L82 PLC and an AutomationDirect BRX PLC. I've enabled the Ethernet/IP Explicit Message server on the BRX, but when I try to read from the BRX, I get an Error Code 16#0005 - Class or instance not supported. I have tried both thru the ethernet port on the L82 processor and thru an ENT2R card with the same results. What am I missing?
Message instruction: Message Type CIP Generic, Service code e, Class 4, Instance 101, Attribut 3
Message instruction: Message Type CIP Generic, Service code e, Class 4, Instance 101, Attribut 3