Micrologix1000 to Micro850 program conversion

chandrapaul

Member
Join Date
Mar 2016
Location
bangladesh
Posts
119
Hello,
i made a program in rslogix500 for my micrologix1000 plc. can i import this program into the CCW software then convert the program which will work in the micro850 plc?

Thanks
 
CCW Version 11 does have that capability, but I have never used it, so I can't tell you how well it works.

Only CCW Version 11 !!!
 

Similar Topics

Working on a machine that uses an Allen Bradley micrologic’s 1000 controller. Wondering if there is away to tie in the output to an external...
Replies
14
Views
2,846
Could someone please guide me in the right direction? I currently own a 1761-L32BWB (Micrologix1000 processor) and a 1761-CBL-PM02 (programming...
Replies
15
Views
4,460
Ihave a machine with a failed Moeller PLC that I have no documented logic for, and am replacing with a micrologix 1000 1761-L20BWB-5A. Most of my...
Replies
14
Views
3,322
Hi all. Ive made a small I:0/0 push button and a O:0/0 light program to test that my plc is working. I got the bush button on a 24VDC and the...
Replies
35
Views
5,179
Hello, Have a ML1000 communication via NET ENI module to a PanelView Plus 600 HMI running Ver3.1 firmware. In my FTView 6 I've created and on...
Replies
4
Views
1,940
Back
Top Bottom