jaden
Member
Make sure that you are not using "zero" for "oh", and not using "one" for "I".
How Do I solve program compilation issue on micro logix starter lite/emulator
- Thread starter IdealDan
- Start date
SLC500 program must be compiled
I got this error when I cleaned out an RSS program to start some testing.
The posts above about how the addresses are entered are misleading. If RsLogix Micro accepts the rung, then there's nothing wrong with the rung instructions or addressing on that rung.
The solution is to FULLY compile the project with the 'Verify Project' button next to the (+ / - ) view zoom buttons.
I got this error when I cleaned out an RSS program to start some testing.
The posts above about how the addresses are entered are misleading. If RsLogix Micro accepts the rung, then there's nothing wrong with the rung instructions or addressing on that rung.
The solution is to FULLY compile the project with the 'Verify Project' button next to the (+ / - ) view zoom buttons.
Similar Topics
I need to send product data to the robot. When product is produced then from another system i got product data . I kept those data in a S7 data...
We switched from a SLC5/04 to a 5069-L320ER, and the SLC's NI4's were replaced with the 5069-IY4, which is a pretty neat card; however, the IY4's...
First time posting. I'm just a mechanical engineer trying to be a programmer so bear with me on some potentially stupid questions. I'm attempting...
Hello,
I'm creating a small application to operate a valve on an existing application between a CompactLogix and a FTView SE instance.
I...
could anyone help me how to solve this problem via rslogix? thank you