SE SmartX Controller

Hello all. I am hoping someone here has experience with a Schneider Electric PLC that I have been tasked with getting into. It reads "SmartX Controller - AS-P and then a power supply and several expansion modules. I looked it up on the Schneider website but came away with more questions than answers. First, do I need BACnet or this EcoStruxure that I read a little about? Then, do I connect via the micro-usb or use the Enet connection? Thank you

I believe that is a "bms" type controller. I've looked into them a bit since i have some vav controllers that are Schneider. Like you, i cant make any heads or tails on what hardware or software is needed. Their whole wevsite is completely terrible with seemingly no useful information. Everything is just buzzwords and marketing ********.

g.mccormick said:

I believe that is a "bms" type controller. I've looked into them a bit since i have some vav controllers that are Schneider. Like you, i cant make any heads or tails on what hardware or software is needed. Their whole wevsite is completely terrible with seemingly no useful information. Everything is just buzzwords and marketing ********.

Click to expand...

I'm glad that it doesn't look like I'm the only one who has an issue with big company websites that offer no real help with product support, and just sling advertise after advertisement for the next big thing at you.