PowerFlex 700 and PowerFlex 700S

skhara

Member
S
Join Date
Dec 2006
Location
WI
Posts
19
Hi,

I am curious if some of you may be able to explain to me the difference between the PowerFlex 700 with

Vector Control and PowerFlex 700S. I know of instances of both having been used for almost identical

applications. Another engineer once mentioned to me that the 700S is better in winder control application,

but couldn't really explain why.

Hope you guys can help.

 
The S-for-System drive is much more complicated and powerful than the standard drive. You can use it with a DriveLogix controller cartridge, giving the controller direct memory access into drive tuning and command parameters.

In general I don't recommend 700S drives to users who are not drive system specialists.
 

Similar Topics

T
Powerflex 700 Losing Ready Status at the beginning of shift.
I've got a Powerflex 700 that doesn't like to get going in the mornings. This motor will run anywhere from 30 seconds to 5 minutes before it just...
Replies
3
Views
154
ASF
A
Y
Viewing Modified Parameters on PowerFlex 700 VFD
Looking for some assistance. I am very familiar with Yaskawa VFDs, but not so much with AB VFDs. I am working on some hardwired AB PowerFlex 700...
Replies
2
Views
127
alan_505
A
M
Powerflex 700 dno file printed out
Can someone with Drive Executive please save me a printout of the parameters for this drive in this file. I'm in a bind and would greatly...
Replies
2
Views
362
muusic_man
M
A
Powerflex 700 / 70
Hello all, I was forced to replace a Powerflex 700 to a Powerflex 70 due to what is available. The digital input parameters (361-366) have a...
Replies
1
Views
480
robertmee
R
E
Powerflex 700 with Micrologix 1100 Ethernet
Hello, I have an existing application that has a Powerflex 700 with a 20-COMM-E adapter controlled by a Micrologix 1100 via Ethernet. The setup...
Replies
6
Views
1,193
Edwardp
E
Back
Top Bottom