naturephoenix
Member
Hello all.
This is my hardware equipment:
This is order inside TIA selection tool: (but I'm tryinng to make program inside STEP 7 v5.5 sp4)
1. 6ES7405-0DA02-0AA0 (PS)
2. 6ES7412-5HK06-0AB0 (S7400H CPU)
3. 6ES7405-0DA02-0AA0 (PS)
4. 6ES7412-5HK06-0AB0 (S7400H CPU)
5. 6ES7153-2BA10-0XB0 (ET200M IM 153-2 )
6. 6ES7153-2BA10-0XB0 (ET200M IM 153-2)
7. 6ES7321-1BL00-0AA0 (DI x 32)
8. 6ES7321-1BL00-0AA0 (DI x 32)
9. 6ES7321-1BL00-0AA0 (DI x 32)
10. 6ES7321-1BL00-0AA0 (DI x 32)
11. 6ES7322-1BL00-0AA0 (DO x 32)
12. 6ES7322-1BL00-0AA0 (DO x 32)
13. 6ES7331-1KF02-0AB0 (AI x 8)
14. 6ES7331-1KF02-0AB0 (AI x 8)
15. 6ES7331-1KF02-0AB0 (AI x 8)
16. 6ES7331-1KF02-0AB0 (AI x 8)
17. 6ES7332-5HD01-0AB0 (AO x 4)
18. 6ES7350-1AH03-0AE0 (FM350-1 COUNTER)
This I'm trying to configure inside step 7 v5.5 sp4
I did that on this way inside STATION H, take a look picture 1
I'm able to do compile without problems.
I've noticed following : Modules addresses inside (ET200M IM 153-2 for 1. PLC) and (ET200M IM 153-2 for 2. PLC) can not have same ADDRESS. Take a look picture 2.
If I open each module inside properties I can choose redudancy module, so I choice appropriate
module from different DP Master. Take a look picture 3.
I'm able to do this for DI and DO modules, but for AI, AO and COUNTER nope. Take a look picture 4.
Why is that case, am I doing anything wrong with hardware configuration?
Project is uploaded here as attach, and here are links for pics:
pic1 : http://i.imgur.com/1whdlCq.png
pic2 : http://i.imgur.com/GAxIsI0.png
pic3: http://i.imgur.com/8MLes56.png
pic4 : http://i.imgur.com/32Eb7Zh.png
THX in advance
This is my hardware equipment:
This is order inside TIA selection tool: (but I'm tryinng to make program inside STEP 7 v5.5 sp4)
1. 6ES7405-0DA02-0AA0 (PS)
2. 6ES7412-5HK06-0AB0 (S7400H CPU)
3. 6ES7405-0DA02-0AA0 (PS)
4. 6ES7412-5HK06-0AB0 (S7400H CPU)
5. 6ES7153-2BA10-0XB0 (ET200M IM 153-2 )
6. 6ES7153-2BA10-0XB0 (ET200M IM 153-2)
7. 6ES7321-1BL00-0AA0 (DI x 32)
8. 6ES7321-1BL00-0AA0 (DI x 32)
9. 6ES7321-1BL00-0AA0 (DI x 32)
10. 6ES7321-1BL00-0AA0 (DI x 32)
11. 6ES7322-1BL00-0AA0 (DO x 32)
12. 6ES7322-1BL00-0AA0 (DO x 32)
13. 6ES7331-1KF02-0AB0 (AI x 8)
14. 6ES7331-1KF02-0AB0 (AI x 8)
15. 6ES7331-1KF02-0AB0 (AI x 8)
16. 6ES7331-1KF02-0AB0 (AI x 8)
17. 6ES7332-5HD01-0AB0 (AO x 4)
18. 6ES7350-1AH03-0AE0 (FM350-1 COUNTER)
This I'm trying to configure inside step 7 v5.5 sp4
I did that on this way inside STATION H, take a look picture 1
I'm able to do compile without problems.
I've noticed following : Modules addresses inside (ET200M IM 153-2 for 1. PLC) and (ET200M IM 153-2 for 2. PLC) can not have same ADDRESS. Take a look picture 2.
If I open each module inside properties I can choose redudancy module, so I choice appropriate
module from different DP Master. Take a look picture 3.
I'm able to do this for DI and DO modules, but for AI, AO and COUNTER nope. Take a look picture 4.
Why is that case, am I doing anything wrong with hardware configuration?
Project is uploaded here as attach, and here are links for pics:
pic1 : http://i.imgur.com/1whdlCq.png
pic2 : http://i.imgur.com/GAxIsI0.png
pic3: http://i.imgur.com/8MLes56.png
pic4 : http://i.imgur.com/32Eb7Zh.png
THX in advance