markus506
Member
Hi all,
Learning the FTView ME software and have come across an issue: I have a latched process start button, a stop button and a pause button. Stop is momentary and Pause is maintained. If pause has been pushed, then Stop is pushed, I want Pause to become 'unpushed' or reset. I tried switching its State settings to value control, but it still behaves like a state control, i.e. once pushed, and clearing the tag in the PLC, the button still behaves as pushed.
Am I missing something with this? Is this even possible?
Thanks!
Learning the FTView ME software and have come across an issue: I have a latched process start button, a stop button and a pause button. Stop is momentary and Pause is maintained. If pause has been pushed, then Stop is pushed, I want Pause to become 'unpushed' or reset. I tried switching its State settings to value control, but it still behaves like a state control, i.e. once pushed, and clearing the tag in the PLC, the button still behaves as pushed.
Am I missing something with this? Is this even possible?
Thanks!