Hello, I'm trying to access a quantum PLC using ProWorx. Network explorer can find it on modbus plus node 12 but it's status reads "BUSY CONTROLLER". It only started to do this after I tried to reset the PLC by turning off the rack and unplugging the battery.
It seems that no matter what I do the PLC always indicates "BUSY CONTROLLER" and I can't download, get online, etc.
Before I unplugged the PLC the status always showed the correct information.
Any ideas or suggestions would be appreciated... thanks.
-Pete
It seems that no matter what I do the PLC always indicates "BUSY CONTROLLER" and I can't download, get online, etc.
Before I unplugged the PLC the status always showed the correct information.
Any ideas or suggestions would be appreciated... thanks.
-Pete