widelto
Member
Hi folks:
Recently I received a new software package for my ZT410 zebra printer, this package includes firmware for printer port (EIP) , AOP (add on profile) and some documents that explain how to setup the printer.
Setting up the whole thing is easy, in my case I will use 2D code (QR code), but using bar code is exactly the same.
The only you have to do is organize how your data is going to be printed, you have to use ZebraDesigner software to design your label and and send the label to be written on printer flash memory, then copy ascii character to your plc´s printer buffer then send data to your printer and voila.
See attached files.
Recently I received a new software package for my ZT410 zebra printer, this package includes firmware for printer port (EIP) , AOP (add on profile) and some documents that explain how to setup the printer.
Setting up the whole thing is easy, in my case I will use 2D code (QR code), but using bar code is exactly the same.
The only you have to do is organize how your data is going to be printed, you have to use ZebraDesigner software to design your label and and send the label to be written on printer flash memory, then copy ascii character to your plc´s printer buffer then send data to your printer and voila.
See attached files.