Clay B.
Lifetime Supporting Member
I have a project where I need to get the wieght value from a Mettler Toledo Panther series weight controller to a ML1400.
Comms are going to be RS-232. I send a comand for the weight reading to the weight controller and I get a value back.
I am wondering has anyone done this before and would that be willing to share a sample of their code.
I have done this with a Rice Lake and an ML1100, but everyone knows that when you change brands all bets are off.
Comms are going to be RS-232. I send a comand for the weight reading to the weight controller and I get a value back.
I am wondering has anyone done this before and would that be willing to share a sample of their code.
I have done this with a Rice Lake and an ML1100, but everyone knows that when you change brands all bets are off.