Forgive me if this question has been addressed before, but a search for CNB/E did not return any answers.
I have RSLINX Ver 2.50.00.02 (CPR7) installed and we have just recieved a new machine with the 1756-CNB/E 10.007 with firmware revision 10.7
I have a working controlnet network, but I cannot use RSLinx to browse the rest of the network through this module. I am connecting into the backplane via a ENBT/A and can see the CNB/E icon and view module properties, but it does not give me a plus sign to the right of the module to expand the controlnet network. If I enter another rack on the network with a CNB/D, and browse for the CNB/E, I can go through and see everything in the rack.
I have installed the CNB/E EDS file: 0001000C00070B00.eds which I downloaded from the AB/Rockwell site. Has anyone else experienced this, or have any suggestions?
I have RSLINX Ver 2.50.00.02 (CPR7) installed and we have just recieved a new machine with the 1756-CNB/E 10.007 with firmware revision 10.7
I have a working controlnet network, but I cannot use RSLinx to browse the rest of the network through this module. I am connecting into the backplane via a ENBT/A and can see the CNB/E icon and view module properties, but it does not give me a plus sign to the right of the module to expand the controlnet network. If I enter another rack on the network with a CNB/D, and browse for the CNB/E, I can go through and see everything in the rack.
I have installed the CNB/E EDS file: 0001000C00070B00.eds which I downloaded from the AB/Rockwell site. Has anyone else experienced this, or have any suggestions?