I have dabbled with TIA for a while (my Siemens experiance is S5), I now have a project to modify a machine that uses a S7-1200 CPU, the program is written in TIA Portal ver. 14, The issue I have is I can auto detect the device, but cannot upload the configuration due to an Anybus comms device connected via Profinet to ethernet, it reports config for the anybus could not be obtained upload aborted.
I can view the program blocks as long as I remain connected to the PLC, but cannot upload them.
Is there any way I can upload the program blocks so I can view them offline, or is there something I'm doing wrong when auto detecting, is there something I need to do once the hardware config has been found?
S7 hareware is a little new to me. (be gentle )
Steve
I can view the program blocks as long as I remain connected to the PLC, but cannot upload them.
Is there any way I can upload the program blocks so I can view them offline, or is there something I'm doing wrong when auto detecting, is there something I need to do once the hardware config has been found?
S7 hareware is a little new to me. (be gentle )
Steve