Hi,
I have an odd issue.
I use the S/R instruction to enable another step to be executed in the program.
And when "Test_Seq_2" becomes 10, "Transferchain_7.3_Done" should go "False".
Sometimes this work, sometimes the "Set" keeps hanging.
The "Test_Seq_2" becomes "0", but the "Transferchain_7.3_Done" is still "True".
And "Test_Seq_1" is not in Step 10 when i am trying to reset the bit.
Could this be some scan-related issue?
And for good measure.
Same result as the above.
I have an odd issue.
I use the S/R instruction to enable another step to be executed in the program.
And when "Test_Seq_2" becomes 10, "Transferchain_7.3_Done" should go "False".
Sometimes this work, sometimes the "Set" keeps hanging.
The "Test_Seq_2" becomes "0", but the "Transferchain_7.3_Done" is still "True".
And "Test_Seq_1" is not in Step 10 when i am trying to reset the bit.
Could this be some scan-related issue?
And for good measure.
Same result as the above.
Last edited: