slc 50/2

astronutt

Member
A
Join Date
Feb 2007
Location
home
Posts
17
I have an old slc 50/2 proc with a slc dh-485 link coupler sitting next to it what cable do i need to go online with it? thx ps can you tell exact ab cable number
 

Similar Topics

J
Sending temperature from SLC-5/02 to EZiMarquee
I’m attempting to send a temperature from a SLC-5/02 to an EZiMarquee display. The vendor said to use a MSG instruction to send the data to the...
Replies
1
Views
55
dmroeder
dmroeder
M
SLC 505 Outputs not firing
Hello all. I have a few SLCs in my plant and of late we've seen a weird issue: The system will be running normally and then randomly the outputs...
Replies
2
Views
70
Mark_J
M
I
Prosoft Datalogger w/ DF1 Comms to SLC 5/05 - Testing with MicroLogix
I am working on setting up a Prosoft Datalogger model PLX51-DLplus-232. This unit will be collecting data from a SLC 5/05 on the DB9 port set to...
Replies
3
Views
93
Ken Roach
Ken Roach
A
SLC messaging with a ControlLogix redundant system
I have a redundant ControlLogix being set up. This program reads a value from a remote site which happens to be SLC PLC. Rockwell mentions SLC...
Replies
2
Views
91
robertmee
R
A
SLC messaging with ControlLogix redundancy
Hello, I have a ControlLogix redundant controller being set up. The program reads a value from a remote site which hosts a SLC PLC. Rockwell...
Replies
0
Views
74
Alfredbeni
A
Back
Top Bottom