EICS
Member
i need to capture the time between the rising edge of 1 pulse and the rising edge of the next pulse after it.
i have a flow meter that gives a pulse for every 10 litres. i need to calculate the approximate flow rate in Litres/second
i am using an ABB AC500 (PM554-ETH) with codesys.
any one done this before? even if done in a rockwell plc i can recode.
thanks in advance.
i have a flow meter that gives a pulse for every 10 litres. i need to calculate the approximate flow rate in Litres/second
i am using an ABB AC500 (PM554-ETH) with codesys.
any one done this before? even if done in a rockwell plc i can recode.
thanks in advance.